A whirlpool in the garden is a good way to relax in the sun or treat yourself to a warm tub in the evening. Although many have the desire to make this installation themselves, there are some tasks such as watering a concrete slab and the correct power connection that require professional help. Find a specialist nearby so that you can assure a happy experience with your new purchase. Today we will only explain a few of the installation steps and draw your attention to some points.
An outdoor bubble bath will be extremely difficult if it is filled with water, so you have to have a solid surface. You can use a variety of materials for this - from concrete and train sleepers to paving stones. It should be flat, flat and stable. If youDecide for a concrete slab, should it be at least 5 centimeters thick, preferably more. If you want to have it installed on a wooden terrace, you must be sure that you would endure weight.
To put your outdoor whirlpool on the prepared surface, you have to clear the way from all obstacles such as fences, bushes, garden furniture and play equipment. Plan this best in advance and remove everything that could be in the way.
Find a specialist who connects the whirlpool to the circuit of your house. There is no cable with a connector, but a connection box behind the outer wall, to which an electrical cable must be introduced directly from your fuse box. For example, this cable must be secured with a PVC pipe. All 220-volt whirlpools must have an FI system in the fuse box.
As soon as the sparkling pool is set up and connected to the circuit, it must be filled with water. The good news is that it does not have to be connected to the water cycle of your house, but can be filled with a garden hose.
When the sparkling pool has been installed and filled with water, put the cover on so that the water stays clean and warm. The pool is ready for the first use as soon as the water reaches a pleasant temperature.
