DIY decoration for the garden: How to build a fountain yourself and create a cheap water feature

If you want to add a unique element to your garden, you can build a deck fountain yourself. Such a charming fountain made from flower pots or recycled materials, which can stop with purchased versions, will definitely liven up your garden area. Not only can you save time and money, but you can also showcase your own creations. So get inspired by the following outdoor decorating ideas and DIY projects to wow your guests at summer gatherings.

Build your own fountain with simple steps

There are many types of fountains that you can install in your garden. If yoursNo outside garden pond, which serves as a water feature, you can let your own garden fountain do the work. Such units in the garden or backyard are a great addition to the outdoor space for many reasons. One of them is that such a water feature helps to beautify the outdoor space in a cost-effective way.

Any two or three tiered fountain can transform into a garden attraction. Furthermore, such a DIY project wouldn't take much time in a weekend. On the contrary, the easy-to-build tiered fountain can be easily realized and create a special atmosphere through the sound of water in the garden area. Skip the huge and expensive sets because you canwith a DIY fountainget along well. However, consider your space and the landscaping of your backyard or garden when deciding which fountain to have. You can simply start with a two-stage project.

Tools and materials

  • Akku-Bohrschrauber
  • 2 (or 3) ceramic pots
  • water pump
  • Plug for drainage
  • Sealing
  • Plastic saucer
  • Plastic pot (approx. 20 cm diameter)
  • Pebbles or small natural stones

Instructions

  • First place the drain plugs on the holes and press them firmly onto the holes of the large ceramic pot.
  • Next, add the caulk around each plug.
  • After curing, turn the pot over and reapply caulk to the undersides.
  • Then let the whole thing dry overnight.
  • First, drill a hole in the plastic saucer that will be for the pump tube.
  • Fill the large ceramic pot with water.
  • Then adjust the water pump by turning the plastic pot upside down and positioning it on the bottom of the large ceramic pot with water.
  • Place the pump on the overturned plastic pot, making sure the pump hose is facing up.
  • Then fill the large pot with water to just below the rim.
  • Assemble the level by placing the saucer on the ceramic pot filled with water and allowing the pump tube to protrude from the center hole.
  • Place the smaller ceramic pot on the saucer so that the pump hose comes through the drain hole.
  • Next, attach a nozzle of your choice to the end of the pump hose to sprinkle the water
  • Then place some stones in the pot and saucer and spread them in place.
  • Connect the pump and enjoy your new fountain!

How you can build your own fountain from galvanized water jugs or watering cans

Making a simple water feature to display outside your patio area can also be a great idea. So if you need something rustic with a vintage look that you don't have to invest a lot of money in, this may be the right DIY project for you. Here too, a simple water pump and old watering cans that are galvanized are sufficient. With little effort you can create a fabulous and inexpensive water feature. Not to mention, it's pretty easy to put together.

Tools and materials

  • Akku-Bohrschrauber
  • 2-3 galvanized watering cans or water jugs
  • 1 large galvanized tub or a 1/2 barrel
  • Small water pump and water hoses (recommended approx. 20 cm)
  • Hanging brackets (anything that can do the job)

Instructions

  • First, find an area in your yard, such as a fence or wall, that you can use as a supporting backdrop. A landscaped area provides a better environment.
  • You should place your large galvanized tub wide enough to catch the water that flows from the bottom water jug. One to two meters from the fence should be enough. Don't worry about perfect placement at this point, you can adjust it later.
  • Next, determine how tall you want your first water jug ​​to be. It would be best if you place the two water jugs about 50 cm apart.
  • Once you've made your placement, you'll need to drill a hole in the handles of each water jug. This is a must, otherwise the jug could move a lot, causing you to lose water and burn your pump.
  • Then attach the top bracket hanger to your fence and hang the pitcher. Feel free to step back to see if this is what you want. Sometimes it helps to take a step back and imagine the finished project.
  • Now you need to drill another, slightly larger hole in the back of your top watering can. The exact hole placement doesn't matter because you feed the water hose through the hole and then through the grommet. Drilling a hole in the back of the watering can hides the hose. The goal is to make this water feature appear as if it is pouring water without any pipes attached.
  • The only thing left is the hardest part – adding your final watering can. You need to turn on the pump to see where the water is going. This will give you the exact placement where you need to install the watering can. It will also tell you where to attach the other bracket. Mark the location so you know where to install the bracket. You can also mark the handle of the water jug ​​so you can accurately drill your final hole.
  • This little water feature has so much potential to naturally enhance your garden.