Clean the plastic sliding door of the shower: Use these home remedies to remove stubborn limescale and dirt!

The plastic sliding shower door can be easily scratched and harbor mold. Although plastic is highly water-resistant compared to other materials, dirt and grime can accumulate over time, turning your bathroom into a musty and uninviting place. How then can you clean the plastic sliding shower door and remove stubborn limescale and dirt?

Space-saving sliding shower doors are practical and often made of plastic (alsoAcrylic glassorArt glasscalled) or made of a durable material. Plastic is a popular, inexpensive material that can last for years with proper care. With the right home remedies you can clean your plastic shower cubicle in a flash: Find out what you need in the following article!

Cleaning the plastic sliding shower door – tips and natural remedies

The good news is that with a little time and a few common household products, you can remove limescale from the sliding door and the shower cubicle and get it looking like new again.

Get the rails clean with vinegar, baking soda and an old toothbrush

If your sliding doors can be unhinged, they will be easier to clean and the tracks will also be sparkling clean. If the instructions say that this is not possible, you can get an old toothbrush or special cleaning brush andmake cleaning easier.

Mix equal amounts of white vinegar and baking soda to clean your shower stall tracks. The mixture turns into a paste when you add water and stir. Next, apply the paste to the rails to loosen the dirt and grime and leave it for 20-30 minutes. Then take an old toothbrush and gently scrub and remove the stubborn stains. Then wipe the gaps with a damp cloth. Finally, dry the rails with a dry towel - this will protect them from rust.

Clean heavily soiled running rails with a steam cleaner

You can completely remove soap scum, hard water stains, limescale and mold from the runners using a steam cleaner. With this method, hard-to-reach areas become clean again immediately.

Clean plastic sliding doors with vinegar

How can you clean the plastic sliding door using natural means? Vinegar can be used to remove dirt and debris from hard-to-reach places. Vinegar also protects the shower door from dirt caused by hard water. You will need water, white vinegar and a spray bottle. Mix the water and vinegar in a 1:1 ratio and pour the cleaning solution into the spray bottle. Spray the entire surface of the shower doors with the cleaning solution. Then allow the cleaning solution to take effect for 10 – 30 minutes.

After that, take a small bucket and mix white vinegar and water again. Use a soft sponge and lightly scrub the stubborn stains. The inaccessible areas of the sliding doors can be cleaned with a hand shower and an old toothbrush. After this, any hard water stains that have formed around your shower door should be gone. Then pour clean water into the small bucket. Dip the sponge into the bucket and wipe the plastic sliding door with clean water.

Also interesting:Cleaning milky glasses: How to get the cloudy glasses out of the dishwasher clear again!

Clean the plastic sliding shower door with baking soda and lemon

Just as vinegar can remove hard water stains, grease, and soap scum, so can lemon juice. With the addition of baking soda you get a safe and effective, natural cleaning agent for your plastic sliding door. A plus point of this mixture is the stimulating lemon aroma it leaves behind.

Mix baking soda and water to make a cleaning paste. A small layer of baking soda paste is enough to clean your shower door. Apply baking soda paste to the shower door and let it sit for a few minutes. To remove the cleaning paste, cut a lemon in half and gently scrape the surface with the cut surface. When scrubbing, use soft, circular motions and squeeze the lemon to use the juice. Then wash the area with warm water.

Dry and polish sliding doors

Keep a close eye on the situation to see if any traces of soap or dirt remain. After you've given your shower doors a shine, dry them with a clean cloth. Using baby oil on the shower doors prevents soapy water from building up. After cleaning and drying the shower doors, you can also apply lemon oil. Soak a soft cloth with baby oil or lemon oil and polish the plastic sliding door. Then dry the doors thoroughly with a clean cloth or towel.

Tipp: Polishing your shower doors with lemon oil will keep them smelling fresh.

Observe cleaning routine

After a thorough cleaning, there are a few things you can do to maintain the cleanliness of the sliding door. When you get out of the shower, wipe down the rails. This won't take you more than a minute and can helpto avoid mold. This is also a good way to keep sliding doors running smoothly.

Maintain a consistent cleaning routine. It is recommended to wipe down your shower door once a week. This way no dirt will accumulate. If you want to have a shiny new shower door, just follow the instructions we provide.

Don't forget:If you want to protect your shower door from the harmful effects of chemicals, consider using natural solutions.

Also read:Cleaning shower head nozzles: With these home remedies and tricks, it's quick and easy!