The extractor hood is one of the most frequently used kitchen appliances, but is often overlooked. And if she does not pay attention to her, she can get really dirty -clogged with fat deposits and splashes. But if you know how to clean a sticky extractor hood, you will not only optimize hygiene, but also the aesthetics of your kitchen!
How do you get a sticky extractor hood clean
If you have not cleaned your extractor hood for a long time, it cannot be so easy to remove the stubborn fat residues. But if you equip yourself with the right setting and the right home remedies to efficiently clean your sticky extractor hood, it will shine again in a new splendor in no time!
What you need:
- Very hot or boiling water
- Developing detergent (Pril works very well)
- 60 g Backpulver
- Non -abrasive brush
- Paper towels or tea towel
Remove the filter from the hood
First of all, make sure that the power supply of the device is switched off and let it cool down. Then remove the filter and all other removable parts from the extractor hood. Get the operating instructions for the respective device and check how to remove the parts correctly. Alternatively, you can also check online if you have no access to the original instructions.
Fill the sink with hot water
The hotter the water is, the more effective it is. Depending on how hot you get the water from your tap - that could be enough. Alternatively, you can boil the water in a kettle and then pour it into the sink.
Add baking powder and detergent
Put a good dash of detergent and 60 g baking powder in the hot water. Stir everything with a brush until the water is nice and soap.
Place greasy filters in the water and scrubbing
Immerse yourself in the sticky extractor hood into the water. Make sure that this is completely covered. Let them soak for 10 minutes. Take a non -abrasive brush after soaking and scrub the filter. If necessary, put more detergents into the brush while scrubbing.
Rinse and dry
Rinse the filter of the extractor hood thoroughly in hot water and dry it with a paper towel or a clean cloth. Put the filters back into the hood!
How often should you clean your extractor hood
When it comes to obtaining a well -functioning extractor hood, the golden rule is to clean it regularly. Regularly means that you should wash the filter of the extractor hood once a month, especially if you cook every day. In this way, sticky deposits are avoided, which are difficult to remove and seriously impair the function of the extractor hood. On the other hand, the accumulated fat is much easier to remove with regular care, so that the cleaning process becomes quick and easy.
