How to remove deposits on the pool floor? Use common cleaning methods for mud and dirt

Do you have to deal with different types of dirt and deposits on the pool floor? Here you can find out what measures to take to remove annoying sediments or algae from the floor surface of your swimming pool!

A pool in the garden or outdoors can quickly accumulate dirt, whereby deposits on the pool floor are often a challenging matter. Of course, you could leave cleaning work to a professional team, but in the long run this can be expensive. It would therefore make sense to be able to identify and remove any soil rates in order to carry out regular pool cleaning yourself. Fortunately, there are some alternative methods and strategies according to which you can do the task faster and without much effort. Here are some useful information and tips that you can follow to keep such surfaces clean with your own resources.

What should you consider in order to be able to remove deposits on the pool floor?

Sometimes it can be tedious to keep your pool and especially your soil in clean. You should not forget the chemical indicatorsFor the purpose of a clean pool waterTo monitor at least twice a week. Regardless of whether it is a garden pond or swimming pool, your waters for falling leaves, sand, grass, stones and various natural sediments such as lime deposits and algae are susceptible. In most cases, the use of modern pool vacuum cleaners, algicides or filter systems would suffice, but deposits on the pool floor still remain. For this reason, it is important to take some factors into account in order to make pool cleaning more effective.

Why does the pool floor get dirty?

Pool care seems to be a never -ending task, with the sides and the soil becoming slimy over time. In addition, despite careful cleaning, various deposits can accumulate in these areas. So why can it be important to consistently proceed with pool cleaning? It cannot be avoided that a swimming pool is confronted with dirt, bacteria and algae every day. Standing waters enable algae growth, andPools are the perfect placefor that. Another to be taken into accountInfluence factor are rainfallswhere different sediments get into the pool water and deposit on the ground. The main causes are wind, dust, crushing plant leaves and even the feces of animals that are in the water.

In addition, deposits on the pool floor can also occur through regular human use. When bathing, the skin sets fats and bacteria, while in sunscreen there are ammonia and nitrogen. Powder ladder and other elements can also be problematic areas, since a pool robot cannot clean them well and the dirt gets on the ground. Furthermore, you should make the removal of deposits on the pool floor as the last cleaning step after cleaning all heavy dirt particles from the pool walls. This saves you additional effort and you get a better overview when it comes to the general condition of the pool. The stones and sand they brought with their bathers can constantly settle there.

How do green deposits arise in the pool on the ground?

Before we start cleaning deposits on the pool floor, it would make sense to find out what organisms are in the waters. It is about the different types of algae that can thrive in such an environment in favorable conditions. Accordingly, it is common in many cases to have more than one type of algae in the pool, although it can generally be four main groups:

  • Green algae is about the most frequently occurring algae variety, which, however, also consists of several thousand different types. These can occur, for example, blue -green or in brown tones.
  • If it is black algae, they mostly look like stains and also occur in different types of algae.
  • Senff -colored algae is about an algae species that logically received its name from the similarities with mustard. After dying, they look like a fine, yellow -brown powder, which often leaves brown deposits on the floor in the pool.
  • There are still the red algae, which are a single type that is still known as a pink slime.

In addition, algae spores are constantly in the air, whereby they are most often transferred into the pool water through water droplets. A low chlorine content in summer, such as below 3.0 ppm, can favor the occurrence of algae. Even if the pH is too high, it can happen, which is why the regular testing of the pool water with test strips or reagents is very important. Algae prefer a high pH, ​​with the effect of the chlorine decreasing in such values. For example, chlorine with a pH of 8.0 is only 20 % effective compared to a pH of 7.2. You can use high-quality preparations and automatic dosing systems to maintain optimal pH values.

How can algae be removed as deposits on the pool floor?

If you do not pay attention to the cleanliness of the pool water, there may be negative effects such as algae flower. In addition, dirt caused can discolour the bottom of your pool if you leave it there for too long. For this reason, it is important to act in good time and remove dead algae dust. After treating your pool against algae blossom, the most effective cleaning method is to absorb the fine dust with a pool vacuum cleaner or pool robot. You can take the following measures to prevent dirt and algae in the pool:

  • First of all, it would make sense to identify the existing types of algae in order to apply the correct procedure and resources.
  • Next you can remove everything from your pool apart from the cleaning tool.
  • Then you should test the pH value of the pool water and compensate for the appropriate equipment.
  • Then disinfect the water with chlorine and use algicides if necessary.
  • If there are green deposits on the pool floor, chlorination helps with preparations that quickly dissolve. It is advisable to carry out such a treatment in the evening because the summer heat weakens the effect due to the sun's rays. Find out about the required amount of the preparation that depends on the volume of your pelvis, as well as the type and extent of algae. In addition, when using a pool cleaner, you should always follow the instructions from the manufacturer.
  • Scrub the pool base with a suitable brush to remove stuck algae spots that were pressed onto the bottom of the pool by the algicide.
  • Also clean the pool walls with a scrubbing brush to remove all remaining algae spores.
  • If necessary, add flocking agents to clean up a muddy or brown pelvic floor. As a result, algae dust and tiny dirt particles contract and form larger lumps, which are then easier to remove as deposits on the pool floor. It is important to run the pool pump and the filter system.

How do you clean the pelvic floor with a vacuum cleaner?

By regularly vacuuming the pool floor, you also prevent the deposition of thick layers of limestone. These can only be very difficult to remove over time. In such cases, the investment in special devices such as pool vacuum cleaners can be worthwhile. This means that any pelvic floors can be kept clean effectively, although this can be done either manually or automatically. For example, if you use hand vacuum cleaners for the pool, this would be a cheaper alternative. However, these are easy to use, but are suitable for smaller areas. Such devices consist of a telescopic handle, a brush and a filter that flows through the water.

How should you vacuum deposits on the pool floor for larger pools? In this case, the automatic version of the pool vacuum cleaner would be a better choice. Such a device can be used on the pelvic floor and can remove all ground rates while moving along the surface. There are also modern variants that still have a remote control. Otherwise you can also preprogramming them and adapting your cleaning route to the shape of your pool. You can also remove a sand pump that removes all deposits on the pool floor such as sand or stones on the principle of suction power. Such devices have a filter system where they collect dirt and then pump out the clean water back into the pool.

How can deposits be removed on the pool floor without a vacuum cleaner?

Removal of dirt deposits on the pool floor without the devices described above would also be possible without having to be too difficult. This can be done with strategic steps and existing equipment such as kescher or garden tool clever. To do this, you can first use a skimmer to remove all residues floating on the water surface. Then you can attach the kescher to its rod and thus scoop out everything that lies on the bottom of your pool. Although this could require some attempts, deposits on the pool floor can also be removed with a little more time.

In addition, pool cleaning sometimes requires some creativity. Alternatively, you can also use a leaf hard to get rid of dirt accumulation on the pelvic floor. It is a versatile garden tool that most people already have in their dandruff. It can be a perfect manual replacement for pool vacuum cleaners, whereby you can try to use a plastic rake. In this way, the metal will not cause any damage and you can carefully put the deposits on the pool floor on a small pile. As soon as you have collected the dirt on a bunch, you can carefully pick it up and dispose of it.

How can you prevent dirt accumulation on the pelvic floor?

When it comes to cleaning any kind, the rule of thumb is that prevention is the key. After they followed the above steps and tips and removed dirt like sand and algae, you should also keep future contaminants to a minimum. Should it actually be dirty of the pool floor, some simple preventive measures would be recommended. So keep dirt away from your pool by:

  • Use a pool cover and ensure that you properly rinse or clean your filter system if necessary.
  • If the problem continues, you can install an outdoor shower with which your bathers can remove any dirt from you before swimming before you go into the pool.
  • Regardless of which additional countermeasures you choose, you should disinfect the pool water to prevent transmission of illness.

Now the liberation of the pool floor of dirt accumulation such as sand and sediments with the right steps can be a not so tedious task. Based on the methods described, this can be done faster and easier, whereby regularity is the most important thing. By regularly carrying out pool maintenance during the high season, they also make it easierPool cleaning after winter. Dirt and mud constantly get into the pool water, which can be discouraging, but with some basic knowledge and some patience you can better deal with it.