Unfortunately, too little or changing water pressure is a very common phenomenon in residential buildings and single-family homes. This means problems with showering, dripping taps, water running very slowly in the toilet cistern and inefficient garden irrigation. In other words: reduced comfort. If you have very low water pressure in your home, installing a booster pump could be the solution. A domestic waterworks allows you to increase it throughout the system and all devices connected to it: shower, faucet, toilet, washing machine, garden sprinkler, etc.
Increase water pressure with domestic waterworks
There are many types of pressurized water pumps, so you will need to do some research and find out which oneDomestic waterworksis suitable for you. Read reviews, talk to others, and make a smart decision for your home based on your situation. The booster pumps are usually affordable, compact and relatively easy to install. What you don't typically get with these devices is a way to adjust the additional pressure. This means that it is important to find out in advance how much water pressure you now have and how much delivery capacity the pump has to produce.
Measure the water pressure
A water pressure gauge, also called a pressure gauge, can be purchased from the hardware store and used to check the existing water pressure. The device displays pressure in bar or psi (pounds per square inch). Normally the pressure should not exceed 5 bar (75 psi) as this is not good for the installation system. If the current pressure is 2.75 bar (40 psi), you should use a booster pump that delivers no more than 2.41 bar (35 psi). However, there are only a few domestic water machines where you can adjust the output pressure.
This is something you should keep in mind
- How big is the main water pipe coming into the house?
The installation will go more smoothly if the pressure water pump connection size matches the pipe size of the existing pipe. By installing flexible pipes on the domestic waterworks, the process is quick and easy. So make sure you know what size pipe you need.
- Is there enough space for a domestic waterworks?
Limited space is always a big issue these days. Even if the pump is small, you still need to allow enough space so that the pump can be serviced and also allow for good air circulation.
- Is there a power outlet nearby?
Most domestic water systems come with a 0.5 to 2 meter long cable. After determining the location, make sure there is an electrical outlet nearby. If there isn't one, you'll need to consider whether it's worth running a new power line for the pump.
- Is the location dry and frost-free?
Consider environmental conditions when choosing a location for the domestic waterworks. Is it the garage, the basement or thatGarden house well insulatedor do you need to protect the device from cold and moisture to prevent it from freezing or rusting?
- How much effort will it be?
In order for everything to be installed correctly, you have to connect the domestic waterworks to the water pipe in the house. You should ensure maximum tightness of the screw connections. It is also advisable to use a Teflon tape there, as this ensures an absolute seal. It is important that you can switch back to the local water network at any time when you connect to the domestic water pipe.
Find out more about the work to be done and the cost. You can call local plumbers to find out how much it will cost to install a home water system. At least you know how much you would save by doing it yourself.