A very dirty shower is not a pretty sight. Luckily, there are some home remedies that make cleaning much easier and quickly remove limescale and mold from the shower cubicle. We give some tips on how to get the shower sparkling clean again. And reveal which tricks don't work. Cleaning the shower, made easy!
Clean calcified shower: Remove limescale from glass and plexiglass
Tipp 1:Hot water and steam can make the job much easier. Many stubborn deposits can then be removed quickly and easily.Clean the bathroom, after someone in the family has showered.
Home remedies for limescale:Mix 50 ml of ammonia water with 20 ml of white table vinegar, 2 tablespoons of baking soda and 500 ml of hot water. Ammonia water and vinegar have a strong smell, but it goes away quickly. However, you should definitely ventilate the bathroom during and after cleaning. Pour the home remedy into a spray bottle (without shaking the bottle) and spray the shower cubicle with it. Let the home remedy work for a few minutes and then rinse off the dirt.
Tipp 2:Rinse off the home remedy first with warm (but not hot) and then with cold water.
Shower cubicle: Clean the gaps with homemade rinse aid
Do you find the smell of ammonia water and vinegar too strong? Then you can make your own rinse aid and use it to get the shower cubicle, including heavily soiled spaces, clean again.
Tipp 3:For hard-to-reach areas such as gaps, you can use a soft dishwashing brush with a soap dispenser.
Make your own rinse aid:Use rinse aid for hard-to-reach areas because it can clean heavily soiled surfaces without scrubbing. Dissolve 30 g of citric acid in 60 ml of lukewarm water and fill the solution into an empty spray bottle (preferably made of glass). Then fill 90 ml of denatured alcohol into the bottle. If you have a dishwashing brush, you can fill the rinse aid into the soap dispenser and distribute the household remedy evenly.
Clean the shower: Rinse the drain with potato water
Tipp 4:Over time, soap residue, dirt and other residues such as grease collect in the drain. To remove these, you can add potato watershake the drain. Leave this on for about 30 minutes. Then rinse the drain with hot, if possible boiling, water.
Clean the shower cubicle: remove mold
Home remedies for mold:You can clean mold with denatured alcohol or with white table vinegar. However, these home remedies can attack sensitive metal surfaces, so you should first check the effect in an invisible place.
As long as you want to clean glass or seals, you can apply the home remedy directly to the surface with a soft sponge. First dilute the vinegar with water in a ratio of 1 to 3. Then let the solution work for 2 - 3 hours before rinsing it off.
If you use rubbing alcohol, you can remove the mold immediately after application.
Clean the shower cubicle: lotus effect with black tea
Many manufacturers now offer special seals for the shower area. The glass walls are coated to repel water. This means less limescale deposits and less soap residue.
Home remedies for lotus effect:But there are also certain home remedies that achieve a similar effect. This also includes black tea. Brew a pot of black tea before cleaning. Let this cool down. After you have rinsed off the home remedy thoroughly, let the shower cubicle ventilate for about half an hour. Then soak a clean cleaning cloth in the tea and wipe the glass surfaces with it. You can also polish the glass immediately afterwards with a dry cleaning cloth.
Clean a heavily soiled shower without getting wet
You want your heavily soiled oneClean showerwithout getting wet? Then you can use a steam cleaner. It disinfects, dissolves limescale deposits and can be used on surfaces made of glass, metal and plastic or Plexiglas. You can even use it to clean the drain and remove soap residue safely and easily.
Once you have cleaned the shower cubicle or shower area with steam, you can also use a window vacuum to dry the surfaces quickly and easily.
How often to clean the shower?
To prevent severe contamination in the future, you should clean the shower regularly. It is best to scrub and dry the surface after each use.
Shock ventilation is better: To prevent mold from forming, ventilate the bathroom after every use and also once in the morning and once in the evening. Leave the window wide open for fifteen minutes. Even if it is raining outside, you should still ventilate the shower area after each use.
In winter, the bathroom is ventilated just as often, but for a shorter period of time. Basically, 5 minutes of burst ventilation is enough to prevent mold from forming.
If the bathroom does not have a window, you can leave the door half open so that the wet area can still be ventilated. In spring you can also use a dehumidifier.
Another important preventive measure,this time against lime, is cleaning with a vinegar or citric acid solution. Once a week in summer and fall and every two weeks in winter and spring are sufficient.
Proper care is crucial for the end result: Therefore, follow the shower cubicle manufacturer's tips to properly care for the materials.