Clean mirrors streak-free in simple steps and how to repair blind spots yourself

Mirrors are an indispensable part of our furnishings; after all, we use them to check our outfit, make-up and hairstyle before we leave the house and they are also necessary for getting ready. But in addition to its useful function, it is also an important decorative element that should be looked after accordingly. Would you like to clean your mirrors without streaks, but somehow it never seems to work? Or does it simply take a lot of time and effort?

One of the most important points to clean mirrors quickly and effortlessly is to do it regularly to prevent dust and dirt from accumulating and settling. Then you don't need any special cleaning products.

How often is cleaning recommended?

Depending on the room, cleaning the mirror surfaces is recommended at different frequencies. In the bathroom, for example, where there is a lot of humidity and toothpaste sometimes splashes onto the surfaces, cleaning is necessary more often. Usually you have to clean the mirror there once every week.

In all other rooms such as the hallway, the bedroom and so on, basic cleaning does not need to be carried out as often. Whenever you dust, always dust the mirror surfaces too. With cleaning products you only clean once a month or even every two months. And so that you can clean the mirrors without leaving streaks, you of course need the right tools and useful tips:

Clean mirrors streak-free with which cleaning products?

It is possible to a limited extent to clean both windows and mirrors without streaks using a normal glass cleaner. This is not absolutely necessary for mirrors because the dirt is usually not as stubborn as on windows, for example. If you want to clean mirrors without leaving streaks, it's better to use themmore environmentally friendly means, How:

  • Dishwashing liquid solution: Simply add a few drops of dishwashing liquid or soap to some lukewarm water
  • pure, warm water
  • Cotton cloth or microfiber cloth
  • possibly anti-static cleaning agent to slow down the accumulation of dust in the future (only use products suitable for mirrors)

Useno way:

  • aggressive means
  • Potatoes being sandblasted
  • Newspaper
  • Home remedies with acid such as vinegar or lemon

The household remedies mentioned above, vinegar and lemon, are very effective if you want to clean a mirror without leaving streaks, and are definitely better than chemical cleaning agents. However, as you know, mirrors have a very thin layer of silver behind the glass, through which we can see our reflection so clearly. If such agents come into contact with this layer, it will be damaged. This can also happen if you use glass cleaner for mirrors, but this mainly depends on the product (no caustic ingredients). If you decide to use these products, make sure that they do not reach the edges of the mirror and therefore the film.

If your mirror has decorations in the form of sandblasting, potatoes may damage them, while with newspaper, the printer's ink can cause discoloration.

How to clean the mirror properly

As long as there are no grease splashes or similar stubborn dirt on the glass, plain water is completely sufficient. Wipe the surface with it and dry off any remaining moisture well with a microfiber or cotton cloth. This should actually be the casedo not form streaks.

If streaks still formed, then there was most likely other contamination. Then use the dish soap version and use it to clean the glass surface. Then wipe with clean water and dry everything with a suitable cloth. A squeegee is usually unnecessary if you want to clean a mirror without streaks.

Remove hair polish

If even dishwashing liquid doesn't help with hair polish, there's another trick: hair shampoo will be your savior in an emergency. To remove hairspray from the mirror, rub the areas with it and a damp cloth and then follow the usual cleaning steps.

What to do if mirror surfaces are foggy?

Sometimes you just want them quicklyfogged mirror surfaceto clear the mirror immediately after showering or bathing. The problem, however, is that unsightly streaks usually arise or dust that has already been collected becomes unsightly smeared. How should you clean the mirror correctly in this case?

Simply rub it dry with a cotton cloth or microfiber cloth. You can't and don't need to do anything more. Do this after every shower or take preventative measures. This allows you to provide the mirror with a protective layer that prevents fogging for a long time. To do this, you simply need to clean the mirror with shaving cream. To be more precise, rub the surface (only use a very small amount) and then polish. Dry soap is also suitable.

Getting blind mirrors clear again

We talk about blind mirrors when the silver layer is already damaged and unsightly spots appear that no longer show the mirror image correctly. You can clean blind mirrors while the oxidation is not too advanced, eliminating the early signs.

The miracle cure that can be used to clean a blind mirror is linseed oil. This is applied very thinly to the affected areas. After it has worked for a short time, you can wipe it off and thereby polish the surface.