The bathroom is one of the most used areas in the house and is therefore very susceptible to dirt. Every household should know how to properly clean a shower. Because dirty shower cubicles don't help you get a good start to the day and aren't particularly hygienic either. If you scrub and scrub and the limescale and mold are still there, you need our pro tips to get rid of them once and for all. Find out below how you can clean your calcified, heavily soiled shower!
Stubborn dirt in the shower – clean tiles and grout
Prepare the bathroom before steam cleaning
Before cleaning your bathroom, you can prepare it by showering with hot water for ten minutes. Make sure all doors and windows are closed. The steam from the hot water filling the room makes stains easier to remove.
Properly clean tiles and grout lines in the shower with vinegar
If you want to clean your tiles with vinegar, simply put some white vinegar in a spray dispenser and spray it onto the wall. Leave it on for half an hour, scrub if necessary and then wash the tiles with warm water. However, be careful not to use the vinegar on cement joints too often or you will have to re-grout the tiles quickly.
Important tip:If you have stone tiles (granite or marble, for example), you should not use vinegar or other acidic cleaning products. Because the acid attacks the tiles and after a few times you can permanently damage your expensive wall.
Cleaning tiles in the shower cubicle with baking soda: remove mold and limescale
Baking soda is probably the best method to try. It's gentle, buteffective in cleaningof tiles and joints. In a cup, mix a paste of one part baking soda and one part water. Apply the baking soda paste to the tiles to be cleaned using an old rag. You can also use an old spoon or spatula to apply the mixture to the joints between tiles. Apply more in areas that are more contaminated with dirt and mold. After applying the paste, you should let it work. About half an hour should be enough.
To remove stains from the grout, take a grout brush or an old toothbrush and scrub the areas where mold has formed. Then take a sponge or squeegee and wipe the tiles and grout with warm water. Check the walls to see if you have removed all mold, soap scum, and mineral deposits from the cleaned area.
Clean a heavily soiled shower: Use a steam cleaner
Another option for cleaning tiles and grout is to use a steam cleaner. These devices are highly effective and do an excellent job of cleaning your bathroom. Just make sure you choose a device that is suitable for your tiles and grout.
How to clean a calcified shower head with home remedies
Perhaps one of the most overlooked parts of our shower is the shower head. Even if it is not affected by soap scum, if neglected it can be a breeding ground for hard water stains, limescale and mold. To clean a showerhead, simply attach a freezer bag filled with white vinegar with a rubber band. Make sure the shower head is submerged in the vinegar and let it sit for 20 minutes or longer. Then remove the freezer bag and scrub with a stiff toothbrush to remove the limescale.
Also interesting:Descale the rain shower: How you can get your calcified overhead shower clean again in a flash!
Clean your new or old shower effortlessly without chemicals: baking soda for the drain
When it comes to the drain, you should avoid harsh cleaners. Pour three cupsboiling water down the drainand then add 200 g of baking powder. After about an hour, add 700 ml of white vinegar to loosen any deposits.
Clean a heavily soiled shower: Wash the shower curtain
If your shower curtain is made of plastic, it can become visibly dirty and difficult to keep clean. It's also a haven for bacteria and germs, so it's important to clean your shower curtain regularly. To clean a plastic shower curtain, take it out of the shower and put it in the washing machine with a little detergent and vinegar on the hot cycle. You can also add some fabric softener.
Cleaning calcified shower cubicles – tips
Clean a heavily soiled shower: plastic shower cubicle
These types of showers are also quite easy to keep clean with a few household items. When cleaning, avoid using abrasive cleaners that could scratch the surface.
Spray the entire area with a homemade shower cleaning solution made from equal parts vinegar and dish soap. Don't forget the calcified fittings - soap scum easily builds up on the shower fittings. Use a soft-bristled brush to clean the faucets and corners. To remove dirt from the floor of the shower cubicle,sprinkle the area with baking sodawhile it is still damp from the vinegar and soap solution. Let it sit for about 10 minutes and then scrub gently with a soft-bristled brush. Rinse the entire shower with water and wipe away excess water with a squeegee or towel to avoid water stains.
Make your glass shower doors shine
Heat some distilled white vinegar in the microwave and mix it with an equal portion of dish soap. Pour your DIY glass cleaner into a spray bottle and coat both sides of the doors. After about 30 minutes, wipe off the cleaning solution with a damp sponge and clean water and dry with a microfiber cloth. You can use the vinegar solution for oneMixture of baking powderand replace detergent.
Putz-Trick:You need a halved potato to rub on the shower stall glass. This creates the lotus effect, which ensures that the water rolls off the glass doors.
