In the age of blow-drying, brushing, coloring, and constant heat styling, dry hair and split ends seem inevitable. But the “hot scissors” split ends cut is intended to solve the problem of all long hairstyles. The electrically heated scissors promise a sealing effect and strong, split-free tips. The alternative approach is not new, but is constantly being improved and developed. There was hype at the beginning of the nineties, but now new models of innovative scissors are coming onto the market again and again. In combination with selected cosmetic hair care products, this procedure produces very positive results and leaves hair healthy and shiny.
Thermocut uses special scissors with an electrically heated blade. On the outside, they look almost like normal hairdressing scissors, but are electrically operated and heated. The device is equipped with a temperature controller so that the hairdresser can set the desired temperature. The temperature is set individually for each hair type depending on the color and thickness of the hair.
Although the hot scissors can reach up to 170 degrees, you won't feel the heat at all. Stylists can adjust the temperature depending on hair type (approximately 110 degrees for fine hair and 170 degrees for thick hair) to achieve the best results. Hot scissors are best for fine hair as they smooth brittle ends and make hair look more voluminous. They are also a good option for women who are not ready to sacrifice their hair length.
The hot scissors – What is the difference to normal hairdressing scissors?
With a classic haircut, the hair splits, while the Thermocut seals the ends of the hair and protects them from environmental influences.
If you look at a hair under a microscope after a simple haircut, you can see that it resembles a fluffy brush. In this way, the hair becomes much more susceptible to environmental influences that make it dry and appear brittle. Chlorine water, harsh hair products and constant heat styling are just a few of them.
The hot scissors, on the other hand, cut the hair in such a way that the ends of the hair are not left open but sealed. In this way, hair breakage and split ends are reduced and the hair is protected from environmental influences. If you then examine the hair under a microscope, you can see the smooth cut edge. The hair structure is preserved and is more resilient.
The anti-split cut with hot scissors also usually takes more time. If the haircut is completed in less than an hour, it could not be called high-quality and correct. The time required for a thermocut usually varies between one hour and three hours and depends on the condition of the hair. It is cut strand by strand.
Before opting for a hot haircut, you need to check the hairdresser's expertise and make sure that he has the appropriate knowledge for this type of cutting technique. In addition, it is desirable to collect all the necessary information about the hair salon you have chosen. The positive reviews from customers will speak for the quality of the services provided. You are welcome to ask the hairdresser about the manufacturer of the equipment he uses. You have to be sure that the result is really worth it. Do not be fooled by the prices of services, they also cannot be an indicator of the quality of the work performed.
How to do a haircut with hot scissors in the salon
First, you check the condition of the hair - this must be done in order to plan the further workflow. The selected temperature of the tool depends on the hair type.
The hairdresser divides the hair into sufficiently thin strands and twists them into small braids. To eliminate split ends, the hairdresser holds the scissors slightly against the hair growth and works along the twisted strands. The protruding hairs are removed with the help of heated hairdressing scissors. As soon as the treatment of the strands is completed, the lower ends of the hair are cut off.
How often do you have to repeat thermal cutting?
Dealing with split ends is the most difficult part of any hair care routine. Whether you have straight or curly hair, if you want healthy hair, regular trims are essential. As a rule, it is recommended to cut your split ends about every 5 weeks. If you want to grow long hair, it is enough to have the ends trimmed with hot scissors every two to three months.
However, the problem with split ends is not solved by cutting them once with Thermocut scissors. According to hairdressers, the best results will be achieved if 3 to 6 such procedures are carried out one after the other. After that, all you have to do within six months is cut off the tips.
Advantages and disadvantages of treatment
All procedures in the hairdressing salon that affect the hair in some way have both advantages and disadvantages. The hot scissors split ends cut is no exception.
Advantages
With regular and timely use of the procedure, the condition of the hair is significantly improved. Cutting your hair makes it thicker and smoother. According to experts, this result is a consequence of the changes in the structure of the hair, which make it possible to strengthen the hair and prevent hair loss. In addition, by using these hairdressing scissors, the hair will be quickly freed from damage caused by curling, coloring and straightening the hair. With thermal shearing, the cutting ends are sealed, meaning that the impact of external factors on the hair is generally reduced.
Disadvantages
First and foremost are the higher costs in the salon. In general, this is between 6 and 10 euros extra on a normal cut. At the same time, unfortunately no one can guarantee the positive effect of the treatment. It was also found that this procedure already takes quite a long time. In addition, you need to care for the hair adequately and avoid strong mechanical stress, otherwise the result of the thermal cut will not last long. In some cases, the hair often appears visually thinner.
Can you do a thermal cut at home?
It is understood that thermal scissors are a tool that should not be used without appropriate knowledge and experience. Don't make the mistake of buying hot scissors and cutting your own hair at home. Only an experienced and qualified hairdresser can determine the appropriate temperature for your hair type and condition.
Alternative for home – split ends trimmer
You can now get an anti-split cut at home with oneSplit ends trimmercarry out. The uncomplicated device has rotating blades that cut the split hair at right angles. You don't have to sacrifice any part of your hair length. The shortening of 3-5 millimeters is not visually visible. To ensure that the entire length of the hair is processed evenly, the hair is first straightened with a straightening iron and then treated with the split ends trimmer. The procedure takes about an hour and a half - a little less than the anti-split cut with hot scissors. However, the advantages of thermal treatment are missing and the hair ends are not sealed.
Conclusion
The positive effect of these hairdressing scissors becomes noticeable after 3 treatments and lasts up to 6 months. Concerns about damage caused by overheating of the tips during hot shearing are unfounded. For best results, the treatment is intensiveHair treatment for damaged haircombined.
Take a look at the before and after pictures in our picture gallery and consider whether you would like to try the split ends cut yourself.
