Find the crowns that are sold not particularly attractive or simply do not fit your costume, you have the opportunity to become creative and make the necessary accessory yourself. Whether you need the headdress for carnival or Halloween does not matter. Because there is still enough time up to both festivals. The following instructions and ideas on how to make a crown are also made quickly and easily. Get started right away!
You can do that quickly and from any materials. You have probably already come to some of the materials yourself, while other ideas may be positive. Either way, you are spoiled for choice. If the accessory is intended for your child, it is best to have it selected yourself and, if possible, help yourself.
Would you have come up with the idea of tinkering a crown out of lace? The top fabric is very noble in itself. If it is also sprayed with a metallic color, the whole thing looks almost like a real one. Now you may think that this is a complicated idea. Then they are wrong!
First measure your head to maintain the necessary length of the tip and cut it right. Then spread the tip on a base with a textile ripening. If you do not have a brush or foam brush, simply dip the tip in the stiff and remove the excess by pulling the tip through between the index finger and thumb. Once the stiffer has been dried, repeat the steps a few times. The tip has to get hard. Then you can color the tip with spray paint.
Wire is one of the classics when it comes to making headdresses. In addition to the wire in a suitable color, you also need pliers that helps you to cut the wire and bend as precisely as possible. In this project, the head is not measured in advance. Cut the wire off at the end, because the bending is necessary, depending on the pattern, a longer piece of wire, the length of which you cannot assess.
Measure about 25 cm from the beginning of the wire. Mark every 5 cm with an edding or felt pen. At these points the wire should be wrapped around yourself. Also make sure that the individual patches or triangles always have the same height. Only the patch that is supposed to be above the forehead could be designed a little higher. If the model has grown big enough, cut off the excess wire, shape a hook with the end and hook it at the beginning of the crown.
It can be made even easier with pipe cleaner because it is softer. A hair -ready is a good basis if you tinker with this type of crown. The wire can be chosen in any color and thus adapted to the costume. Wrap the wire around the hair ripening and at the same time design your spikes. You can glue additional decorations such as bums or glitter stones on the wire.
Such snowflakes are ready to buy and are great if you want to make a frozen crown. The glittering snowflakes are glued to a rubber that is adapted to the circumference of the head. Then sew the ends of the rubber together and you already have a quick DIY crown.
If you have chosen a princess topic for the children's birthday, you can make a princess crown. You are also welcome to design this for all guests. Depending on the material you use, this will not take much time. Design the same crowns or different designs.
Cardboard is always quickly found in the household. And whether you believe it or not, you can make an original headdress for children's birthday. But it is also well suited for another occasion. Use corrugated cardboard for the basic model and then decorate it with smooth cardboard, circles, squares or with glittering stones, glitter and color.
Both cardboard and craft paper can be painted as desired. This gives you an individually designed crown that you can adapt to the rest of the party decoration or the costume. If you want to make such a crown made of paper, you need a sheet of paper, a rubber band, brush and water painting. Do not forget the pad when painting.
Cut out the crown shape from the paper. The shape should be slightly arched if you want the accessory to become funnel -shaped. Then you can start painting. Use any color and design a colorful strip pattern. The paper crown becomes happy and ensures a good mood. Glue both ends together and stab holes in which you attach the rubber.
This crown model is also made in almost the same way. It is particularly suitable for the princess topic and especially for Sleeping Beauty, since romantic roses are shown on paper. In this model, we recommend that we first paint the pattern and then cut out the jagged shape. But you decide that yourself.
Water painting colors are used again. Start with the florets that you can design in a spiral and in different color nuances. Then paint the leaves on the narrow and long craft paper. Let the colors dry well before continuing.
Draw the jack pattern with a pencil on the paper. So make sure everything gets even. Glue both ends together and let the glue dry. Then you can attach the rubber band. Either tie it firmly or use a tacker. Your child can also help you paint when big enough.
Another, particularly simple variant is to use felt as a material. If you want a crown out of felt, you only need a scissors, a rubber and a hot glue gun or glue in addition to the fabric in any color. We recommend a smaller size for the crown so that the fabric can also stand upright. If the crown is too big, the fabric could work aside.
The crown consists of two elements. First cut out the cylinder with spikes after having drawn it on the fabric. To make a felt crown, you then need an underground for this cylinder, which should have the same diameter as the cylinder. This circular floor is also used to attach the rubber band with glue.
Then stick the cylinder on the ground and let the glue dry well. She looks particularly funny when it is worn at the head. As an alternative to the rubber, you can also use a hair ripening or a hair band. Some children do not tolerate the wearing of rubber.
You can use one of the crowns shown above or design a flower wreath for the fairy costume. There are as many variants for the latter. Use artificial flowers or foams and plush wire. You are also welcome to stick a crown with flowers.
The foam is sold in the form of leaves. You can then cut or cut out any figures from this. If you use a scissors, first produce a template, which you then use to paint the flowers if you want to get the same flowers. In each bloom, they stab two holes, through which wire is threaded. This is again a great job for her daughter so that she can help with the crown.
You can wing for the fairy costumemanufacture.
