Whether at home or in the office - clean floors not only ensure a well -groomed ambience, but also contribute to a healthier indoor climate. But who doesn't know it? Despite vacuum cleaners and mops, stubborn stains or deep -fitting dirt sometimes remain. With these practical tips, soil cleaning is effortless and effective!
What is important for good soil cleaning?
There are a number of devices that are suitable for soil cleaning. The vacuum cleaner removes coarse dirt while wiping dust and spots on smooth floors. For floors such as parquet, laminate or vinyl, a slightly damp mop is ideal for avoiding water stains.
Expert tip:Steam cleaners are an excellent alternative for particularly thorough cleaning. They are not only suitable for smooth floors, but also for tile joints and stubborn dirt. However, caution is advised, especially with sensitive surfaces. Is not unsealed or oiled parquetSuitable for steam cleaners, because it can be damaged by the moisture.
Different floors, different care
Each type of floor requires special treatment to avoid damage caused by abrasive cleaning methods or unsuitable products. Here you will find comprehensive instructions on how to properly clean and maintain different types of soil.
Clean laminate
Laminate floors should either be sucked or wiped off with a slightly damp mop. Do not use soap -based cleaning agents because they can leave a matt film on the surface. Wax politur or excessive moisture should also be avoided. Spots can be removed with a mixture of water and vinegar. However, do not use too much vinegar because the smell can be uncomfortable. Stubborn dirt such as shoe poles can be includedacetone -containing nail polish removerorWD-40treat. To protect the floor, felt gliders should be used under plants under furniture legs and drip shells.
Carpet floors
Carpet floors require special attention. Despite the conscientiously sucking, dirt and dirt often stays deep in the fibers. If you have a carpet cleaning machine, this is the most effective way to clean your carpet deep clean. A deep cleaning can help reliably solve stubborn residues from carpets. Anyone who shy away from the effort takes oneCarpet cleaning in Hamburg, Berlin, Cologne or Munich to remove both fixed dirt and dust as well as traces of running. This service is not only an advantage for private households, but also for offices that want to keep all the design goods in.
Spots should be treated as soon as possible because they are more difficult to remove over time. Then suck the carpet thoroughly and use the accessories of your vacuum cleaner to clean areas that are difficult to access, such as carpet edges and places under radiators. In thick carpets, a turbobe brush or power brush is particularly suitable for removing stubborn dirt and animal hair. Regular sucking, at least once or twice a week, and a quick treatment of new spots help to extend the lifespan of the carpet.
Tile floors
Tiles in bathrooms, kitchens or corridors require special care. This is particularly important when it comes to natural stone tiles.
NatureteinIs susceptible to stains and should therefore always be protected with a resin seal. Sealed stone floors should be sucked out thoroughly and then wiped with a mild cleaning agent solution. A special stain remover that is suitable for stone floors is suitable for removal of fat or oil stains.
Ceramic tilesare very easy to care for. A simple cleaning with a mild cleaning agent is sufficient, after which the tiles should be rinsed with clear water. A steam cleaner can also be used because it only needs water and is particularly environmentally friendly.
Tipp: To clean the joints, baking powder, soda or soda can be helpful. To do this, the powder is simply to be mixed with a little water to a stroking mass. The paste is to be put directly into the joints with a brush and rubbed it properly. Then there is plenty of clear water to remove all cleaning remains.
Special feature of terracotta tiles: Freshly laid terracotta tiles consist of unglazed rock goods and need special care in the first year. Use special cleaners and seals recommended by the manufacturer.
Cork
Vacuuming is often sufficient to keep cork floors clean. With waxed cork floors, the use of wood soap or a special corner cleaner is recommended. Conventional household cleaners can, on the other hand, leave stains and should be avoided.
Avoid moisturizing cork floors too strongly, and make sure not to damage the seal or protective layer by pulling devices or furniture over the floor.
Vinyl (PVC)
Vinyl floors should first be swept with a soft brush or sucked off before they are wiped off with a mild cleaning agent. Spots can be removed with a cloth and some spirit.
Clean wooden floors
Whether floorboards or parquet - sealed wooden floors only require a sweep and occasional wet wiping. Use special wooden floor soaps or cleaning agents that are suitable for oiled or waxed soils. Use a little water to avoid swelling or tearing of the wood. Uninhibited solid wood flooring should be swept regularly and occasionally treated with wax. Wax should be used sparingly because excess wax attracts dirt.
Clean linoleum
Linoleum floors can best be cleaned with a damp cloth or mop and a mild detergent solution. Stubborn stains can be removed with a fine nylon pad by slight rubbing.
How often should I clean my floor?
How often you should clean your floor depends on the type of soil and use:
- Living rooms: Sucking and wiping once a week is often enough to remove dust and everyday dirt.
- Kitchen and Bathroom: These areas should be cleaned more frequently- ideally two to three times a week, as stains and germs form faster.
- Carpet floors: Suck out your carpet at least once a week and carry out a deep cleaning every few months.
- Tipp: Households with children or pets benefit from more frequent cleaning to quickly remove animal hair, sand or leftovers.
What order must be observed for soil care?
- Vacuum
- Wip
- Polish up
In order for the soil cleaning to be successful, the soil is always with oneVacuum cleanerto clean. In the first step, gross dirt of smooth floors and carpets can be eliminated. Then PVC, tiles or laminate canwipedbecome.
For the wiping water, a dash of vinegar to reliably mix some citric acid or core soap with plenty of water. These ingredients are sufficient to successfully clean smooth surfaces. Wiping in circular movements, which one of the eight are like, ensures that no wiping traces remain and the last dirt residues are reliably removed.
As soon as the wiping water becomes cloudy, new water must be used. Otherwise the dirt is wiped only by one room to the next.
Then it is important to clean all smooth floors again in a second round with a clean wiping cover and fresh wiping water. So nothing but a pure floor remains.
Hacks and tips
Use two buckets to wipe:Use a bucket for cleaning solution and another to rinse the mop. In this way, you avoid dirty water gets on the floor and achieve a cleaner result.
Start steamto remove stubborn dirt. A steam cleaner is particularly useful toClean tile jointsbecause it can solve dirt and kill bacteria. This ensures deeper cleaning.
Hold on oneRegular cleaning plan.Here is a PDF checklist as an example. Clean hard floors every few weeks and adapt the frequency to the stress. Carpets should be sucked regularly and deeply cleaned twice a year, especially if there are pets or allergies.
Take a tinkerDIY-Düsenwerkzeug. With a cardboard tube you can create a narrow nozzle to clean hard -to -reach areas such as window rails or areas under furniture.
With these tips, soil cleaning becomes easier and more efficient. Try it out and your home will always look inviting and well -kept!