Can you clean tile joints with baking soda and what other methods should you use? – Tips & home remedies

If you want to clean tile grout with baking soda or use other cleaning products in kitchens or bathrooms, there are a few factors to consider. Since these are the most frequently used rooms in the household, regular maintenance and care of the grout is very important. This will prevent possible mold formation and prevent the material from peeling off over time. Of course, you can also have your joints professionally cleaned, but this can become expensive at some point as they quickly return to their dingy state. Fortunately, there are some quick and reliable cleaning methods that can make this household task easier. Below you can find out which of them are suitable for cleaning joints.

Try common variants or clean tile joints with baking soda?

To make floor tiles or wall tilesdried soapy water or soap residueTo get rid of mold, mold and simple dirt, you need a suitable brush, sponge and cleaner. You can use a toothbrush, but its bristles should be hard to scrub effectively. As for cleaning products, many of them can be effective and offer different options for cleaning tile grout. Although many grout cleaners are available in stores, it can be just as easy and cheaper to make your own cleaning solution at home using your own supplies. Use ingredients you already have on hand.

Another important factor you can consider is sealing the joints after cleaning. It may take more time if you want to clean tile grout lines with baking soda and then seal them. In many cases, mildew or mildew can also occurpink mold in the bathroomdiscolor the grout, making the cleaning process even more difficult.

It is important to use the right combination of effective home remedies and cleaning products. Additionally, it is advisable to try grout cleaners in order of severity, starting with an alkaline cleaner, then adding bleach such as chlorine bleach as needed. After a thorough cleaning, it would be best to seal the tile joints.

How often should you clean grout between tiles?

It is recommended to clean the tile grout lines when they are dirty or discolored by mold and mildew. Depending on the intensity of use of the area in question, dirt or mold can accumulate on the grout at different rates. For example, you may only be able to wipe down your tiled kitchen backsplashes occasionally, while frequently used bathroom tiled surfaces require daily or at least weekly cleaning due to moisture. The rule of thumb is to remove discoloration from any tile joints as often as possible.

A common household and cleaning agent, baking soda is also used to clean grout, but not always. Typically the stuff contains sodium bicarbonate, known as baking soda. It comes primarily from other naturally occurring sources, with the list of uses for this common product being impressively long. In some cases, however, you shouldhome remediessuch as vinegar for cleaning tile joints.

For certain types of grout, alkaline cleaners would be a better choice because they may be cement grout. This is easily dissolved by acidic cleaners, including acetic acid. This also applies to stone tiles, as the acid can attack the stone. As for baking soda, it can be a highly praised household cleaner as baking soda is also alkaline and non-acidic. However, if it is very dirty, it may not always be as effective as a grout cleaner. If you do your tile jointsclean with baking sodaIf you would like to, below you will find some tried and tested combinations of various home remedies and cleaning products that you can try out yourself.

Grout cleaning method using hydrogen peroxide and baking soda

  • You can mix baking soda with hydrogen peroxide in a bowl to make a paste that should be somewhat runny. This mixture can then be applied to the grout with a suitable grout brush or sponge, scrubbed and finally wiped off.
  • When using a paste made this way with baking soda, keep in mind that the more baking soda in it, the more white residue you may have to remove later.
  • Nonetheless, this can be a simple and effective cleaning method for light messes, and you'll most likely already have the everyday ingredients on hand.
  • Baking soda and hydrogen peroxide as a combination may be best for grout that isn't too dirty or for quick touch-ups.

Combine lemon juice or vinegar and clean tile joints with baking soda

Aside from the concerns described above, acetic or citric acid can be great all-purpose cleaners. Such acids are suitableto remove stubborn dirt accumulations. The lemon juice also has mild bleaching properties, which can be a bonus if you have dirty tile groutClean baking sodawant. Combined use with baking soda also turns the two liquids into a paste and increases their cleaning power.

  • To make such a homemade cleaning product, you can combine the juice of half a lemon, a tablespoon of distilled white vinegar, and a teaspoon of baking soda.
  • Then dip a scrub brush or kitchen sponge into the cleaning solution and use it to treat the dirty grout lines.
  • When you're done, you can wipe off the excess with paper towels.
  • Combining certain amounts of vinegar and baking soda means you're essentially cleaning with salt. All the ingredients come together to create a chemical equation that is effective and cost-effective.
  • Scrub the cleaning solution onto the grout carefully, however, so as not to damage the material.

Tips for sealing grout

For all of the cleaning methods described above, it is advisable to allow the applied cleaner to act for a few minutes and then wipe it off immediately to prevent any damage. The cleaning process with sealing can be a little more involved, but once the grout looks clean and stain-free, the sealing acts as a protective film. This will prevent future staining and make it easier to maintain cleanliness in tile joints.

  • When applying a sealant to the grout lines, be sure to follow the steps in the manual carefully.
  • It is best to do this with the joints already clean and completely dry.
  • Allow the sealant to fully cure before reusing the appropriate tiled area.
  • Use a penetrating grout sealer for most tile joints, including bathroom and shower areas.