While we all want our bathrooms to remain relaxing, dirt-free spaces, the reality is that these spaces can quickly become dirty with regular use. The bathroom can go from shiny to dingy due to the buildup of dirt, limescale, soap scum and even mold. Without proper care and cleaning, dirty tiles can quickly transform your bathroom from a spa oasis to a room that's at the top of your cleaning list. To keep your bathroom and shower looking new, you should put a little effort into cleaning the grout and bathroom tiles. Here you will find the best tips for cleaning wall and floor tiles in the bathroom!
How often should you clean bathroom tiles?
Little and often is the best approach when it comes to cleaning bathroom tiles. It's not the prettiest job, but if you make the effort to wipe the wet tiles with a microfiber cloth after showering, it will prevent limescale and soap stains. After that, all you have to do is use a homemade tile cleaner every weekRefresh bathroomand give the tiles a light rub to keep them in top condition.
How do you clean natural stone tiles in the bathroom?
When using natural stone tiles in your home, it is important that they are properly sealed so that they do not stain and do not absorb moisture and dirt. There are different types of sealants depending on the type of stone and its surface. It is particularly important to extend the life of the seal byused the right cleaning products. Use soft soap to clean these bathroom tiles. You can also mix warm water and dish soap in a spray bottle.
Cleaning bathroom tiles with home remedies – helpful tips
- Mix your cleaning solution
There are many different onesCleaning optionsof bathroom tiles. While there are some store-bought cleaning products available, you can also make a simple DIY solution using things you already have at home. For standard cleaning, you can mix 120ml of dishwashing detergent with 250ml of hot white vinegar. This is a concentrated formula so you don't need to apply as much.
- Spray the floor and wall tiles in the bathroom
Enter theCleaning mixture into a spray bottleand spray it on the surface of the bathroom tiles. Allow the solution to sit for about 10 minutes to allow hard water and soap residue to dissolve.
- Scrub with a brush
To truly restore your bathroom tiles to the sparkling condition they were just installed in, you'll need to scrub away limescale, soap and other deposits. Start by using a sturdy brush or an old toothbrush to scrub the grout, then work your way to the tiles themselves using quick, circular motions.
- Rinse off
After thoroughly scrubbing your bathroom tiles from top to bottom, rinse them with warm water. This step is essential because residual cleaning solution can leave a layer on the tiles and grout. The warm water also helps to loosen any remaining dirt particles.
- Wipe to remove excess moisture
The final step to ensure your tiles are in...Bathroom stay shiny and clean, is wiping. Since leftover water can cause mold and mildew, you should definitely not skip this step. Use a towel or microfiber cloth.
Clean tiles and joints without chemicals
You can also use home remedies for the tile joints in the bathroom and make a paste of three parts baking soda and one part water. Mix them well. Then dip a toothbrush into the mixture and scrub the grout lines in a circular motion. Not only does baking soda remove stubborn stains, but it also has a deodorizing effect on odors that can be caused by mold.
Remove limescale deposits from bathroom tiles
If you live in an area with hard water, limescale can build up quickly and leave your tiles looking dull. Wipe the tiles with a dry cloth or brush to remove loose dirt and dust.Try this natural methodTo clean your tiles: Make a paste in a bowl by mixing vinegar and baking soda together. Brush the paste over your bathroom tiles or apply it with a microfiber cloth and let it sit for some time so that the solution can break down limescale. Wipe with a clean, dry cloth. The best way to avoid limescale buildup is to clean your tiles regularly to prevent limescale buildup, which is harder to remove.
Important tip:However, this method should not be used on marble or natural stone tiles.
A steam cleaner has a pointed nozzle that can be used to clean corners or crevices. This makes it the ideal devicefor cleaningbathroom tiles and hard-to-reach cracks. The heat of the steam is also great for loosening stuck-on dirt. Apply the steam to the affected stain or surface and then scrub with the dish soap and vinegar mixture.