No matter how many times you scrub your shower from top to bottom, it never looks clean enough because a greasy film builds up at the bottom of the shower door. The shower door seal acts like a tub that catches all the water from the shower. Water stains, limescale, soap scum and, in the worst case scenario, mold inevitably form. Commercial cleaners are suitable, but it's best not to use harsh chemicals. Even if the seal is black or yellowed, you may be able to make it white again. Below we will tell you how you can clean a shower seal.
What makes the shower seal dirty?
When you see the dirty stains on the shower door seals, you may be wondering what it could be? While the rubber seal around the shower door prevents water from running everywhere, it can also trap soap scum and bacteria. If your bathroom stays warm and humid, mold can form around the shower rubber seal. Small, black spots on the seal around the shower door indicate mold growth. If you do not ventilate the shower or wipe it after each use, visible stains may occur.
Clean yellowed and dirty shower seal: Use home remedies
With a few homemade, natural cleaning solutions you can remove dirt, moldand remove limescaleand keep your shower door sparkling clean.
Clean shower door rubber lips with borax or baking soda
Baking soda is a natural cleaning agent that can easily clean limescale, mold and dirt. It is very effective in cleaning shower seals, does not discolor or damage the tiles, and poses no health risks to you and your family. Borax is very alkaline. The product is a very helpful household cleaner, disinfectant and deodorant. Here's how you can get the discolored shower door seals sparkling white again with these remedies:
- Mix 150g of borax powder or baking soda with 2 tablespoons of mild liquid soap or dishwashing detergent. Add 500ml hot water and stir the mixture.
- Dip a soft toothbrush into the solution and scrub the rubber seal. Then leave the mixture to act for 15 minutes.
- Rinse the seal by filling a large cup with warm water and pouring the water over the seal.
Note the following: Baking soda is used in cleaningand may not be as effective at killing mold as bleach.
Get shower rubbers sparkling clean again with vinegar
Vinegar is an excellent, natural cleaning agent that you can use as a homemade mold andYou can use limescale cleaner. Because it is acidic, it creates an environment that prevents the growth of mold and bacteria.
- Mix 500ml of white vinegar with 500ml of water in a spray bottle. Add 1 teaspoon of dishwashing detergent.
- Spray the shower gummies with the vinegar mixture and let the mixture sit for 15 minutes.
- Scrub the vertical and horizontal shower seals with a soft toothbrush, spraying each area again just before scrubbing.
- Rinse the seals by filling a large cup with warm water and pouring the water over the seal.
Clean the shower seal: If there is heavy limescale deposits or large amounts of mold, use bleach
If the mold in the shower is very widespread and difficult to clean, natural remedies may not be enough to effectively remove the dirt. Then do the following:
- Mix 60ml of bleach with 200ml of water in a spray bottle.
- Turn on the bathroom ventilation or open the windows.
- Spray the shower door seal with the bleach mixture. Allow the solution to act for 15 minutes.
- Put on rubber gloves and scrub the seal with a soft toothbrush, spraying each area again just before scrubbing.
- Rinse the seal by filling a large cup of water and pouring the water over the rubber seal.
- Dry the shower seal with a clean cloth.
Important tip:There are a few things to consider when cleaning with bleach. The product can cause discoloration, so you should be careful not to use iton colored shower tilesuse. Chlorine bleaches produce fumes that can irritate the eyes, respiratory tract and skin. It is therefore recommended to wear rubber gloves, goggles and masks when using chlorine bleach to remove mold, limescale and dirt. Also, when cleaning with bleach, make sure the windows are open or the room is well ventilated. Leave the windows andDoors after cleaningThe shower rubbers are left open for one to two hours to ensure that all harmful fumes are removed from the room.
What to do if the shower door seal cannot be cleaned?
Unfortunately, sometimes you wait too long before cleaning the rubber seal and the deposits won't come off no matter what you try. In this case, you can replace the shower seals. All major hardware stores and online retailers sell such sealsfor the shower door, which don't cost that much. You don't need to hire a professional to install a new shower seal as it is easy to install.
