Regardless of whether you take a shower in the morning or in the evening, your shower partition looks cloudy at some point and you need to know how to clean a heavily dirty, calcified shower door. In the new condition, the shower door made of glass or plastic always looks flawless, but if used daily, it quickly fits through lime and remains of soap. And if it is not cleaned for a long time, it can look unsightly and is the last thing that should see. The removal of lime deposits may seem difficult, but with the right cleaning agents that you may already have, it is relatively easy to do. Follow these tips for cleaning a shower door made of glass or plastic with home remedies so that it shines again.
Get blunt, heavily calcified glass shower door again brightly clean
How to clean your shower door and shower partition correctly so that you shine from top to bottom!
Clean glass doors with vinegar
For a homemade shower door cleaner, they mix heated, white vinegar with the fat -loving power of a detergent - in equal parts. Pour the solution into a spray bottle. Spray the mixture to the front and back of the doors and let it work for about 30 minutes until it has loosened the dirt. Then rinse the solution with fresh water and dry the glass with a microfiber cloth.
Please note the following:If youNatural stone tiles in the showerthe vinegar could damage it. Instead, you can mix and use some liquid soap with baking powder to get the glass door of the shower radiant again.
Calculate the shower door: Use lemon
With this trick, shower doors and partitions can be cleaned without residues. Cut a lemon in half, dip the cut surface in baking powder and then rubbing both sides of the glass door.
Read too:How to descalate bathroom fittings? These are the best natural methods!
Decalate a glass shower door with baking powder and clean
Baking powder is ideal for removing lime deposits as a natural abrasive. Use a microfiber cloth, put some baking powder on the cloth and scrub directly on the glass in a circular movements. Then simply wipe with a clean microfiber cloth and rinse the residues. For stubborn limescale depositsyou can do the baking powderApply with the scandal side of a non -scratching damp sponge. Also make sure that the glass is then rinsed and dried to avoid further limescale deposits.
Clean the calcified shower door: shower door seals
Rubber seals catch the entire soap foam and dirt that slid down on the glass. Clean them every time you do a thorough cleaning of the real glass shower door.
Use of vinegar to clean the seals on the shower door
Fill a spray bottle with vinegar and carefully spray the rubber seals with vinegar. Leave it on for 10 to 30 minutes and then use an old toothbrush to use the soap foam,Croach the lime and dirt. Famy a sponge and wipe off the shower door seals.
Soda as a cleaning agent for shower door seals
Mix baking powder and water in a bowl to make a paste. Immerse yourself in the mixture andscrub the shower door seals. In stubborn areas, use a microfiber cloth to apply the paste to all areas of the seals. Leave them up 30 minutes to an hour and scrub the areas again with the toothbrush. Finally, wipe the entire glass pane in the shower area.
How you can prevent lime stains
Your shower door should now shine again. Here are some tips so that it continues to look good.
- Wipe or dry glass doors and walls after each use with a lint -free towel, even if you do not use a cleaning agent.
- Mix a cleaning solution and keep it in the shower for everyday use.
- To reduce soap foam, you should switch to liquid soap. In the case of liquid soap, the likelihood that it reacts with the minerals in the water and causes water stains, less than with soap pieces.
- If you are lucky enough to have a window in your bathroom, leave it open after showering to derive the moisture. This helps to dry the shower and prevents from preventingMold forms in your bathroom. Leave your shower door open for the same reason.
- Finally, you can rub the glass with a little lemon oil. The oil helps against lime and soap deposits on the glass partition or shower door.
Clean the shower door calculated: What do you use in plastic?
The natural household products that represent an appropriate alternative to chemicals include white vinegar and baking powder. Rashes and sponges for cleaning dishes are also suitable if you are lime on your shower doorremove plasticwant. Experiment with pastes made of baking powder, water or vinegar and detergent. Spread the paste on the shower doors, let them take effect and then rinse them off when scrubbing. White vinegar is ideal for removing water stains and is particularly effective when you heat it in a saucepan or in the microwave until it steams. Empty and detergent solutions also effectively eliminate soap foam. For lighter cleaning tasks, mix 250 ml vinegar with 250 ml of water in a spray bottle and use the mixture to clean and descale plastic shower doors.
Keep the shower door out of plastic and avoid lime deposits
Faciliate cleaning of your shower doors next time by making the formation ofWater stains and soap remainsimpede. Bring a water puller in the shower and use it to wipe the doors after showering. A light layer of lemon oil, which is applied to the doors with a damp cloth, also has a water and foam repellent.
