How to remove mold from joints in the shower & from silicone with harmless home remedies

Tiles protect the damp bathroom from mold, but it's not possible without them: over time, unsightly mold forms in the rough joints, the bathroom's weak points. Not only is he an eyesore, but he's alsoharmful to health. That's why you should regularly remove the mold from the joints. Of course you can use chemical and aggressive cleaning agents for this. But the wrong one can not only damage the joints, the fumes are no less harmful. So why not use natural remedies instead? We have compiled a list of suitable remedies that you can use if youRemove mold from jointswant.

Removing mold from joints – how to prevent spores?

Not everyone has onefugenloses Badand dirty joints are therefore unavoidable. Of course, it's best if you don't have to remove mold from joints in the first place. While in some cases it is not up to you whether mold develops (e.g. poor construction quality or materials), in other cases you can do something yourself to prevent it from forming. The bathroom is a very humid room. For this reason, it is particularly important to ventilate well after showering or bathing (through shock ventilation) so that the humidity can drop back to the usual 60% or less. A constant room temperature of 24 degrees should also be maintained if possible.

You can have wet wallskeep clean after showeringby drying them with a towel. However, since this is not always possible due to time constraints, at least leave the shower doors open so that moisture does not build up in them and the shower or tub area can dry quickly. It is better to leave shower curtains spread out, because if they are crumpled up at one end of the rail, the water cannot evaporate well.

Which means are most suitable depends, among other things, on the type of joints. Mold leaves stains, toowhen it is removed. Some products have a bleaching effect and can also remove such stains, but are only recommended for light-colored joints. Dark respectivelycolored tile jointsOn the other hand, it is better not to clean with bleaching agents, as this could change their color and in the end, remaining stains do not play a role in this case anyway. Silicone joints are usually used around windows or for other edges. Here too, the same rules apply regarding bleaching and non-bleaching home remedies.

Before you resort to cleaners, you can also use oneSteam cleanerattempt. The hot steam penetrates deep into the grout, removing dirt and killing bacteria and spores at the same time.

Remove mold from joints with denatured alcohol

Put some denatured alcohol on a cloth or brush and work it thoroughly into the joints. Denatured alcohol is a good oneHome remedies for mold formationin the shower and other areas of the bathroom, but it does not have a bleaching effect, so it may not remove mold and other discoloration.

Remove mold with alcohol

More specifically, what is meant is so-called isopropyl alcohol, i.e. cleaning alcohol, which is also used in disinfectants and is therefore effective against a wide variety of pathogens. Therefore, you can also opt for it if youRemove mold from jointswant.

Hydrogen peroxide against mold

Hydrogen peroxide (3% is enough) is a practical home remedy that is popular because of its disinfectant properties. In contrast to the two variants mentioned above, this agent is bleaching and can therefore not only neutralize the mold spores, but also remove mold stains from joints at the same time. This way you can also clean silicone joints that have become discolored. Apply the liquid using a brush or cotton swab. If the stains are more stubborn, you can then help with a joint pencil.

All-purpose baking soda or baking powder

Both work wonderfully in the fight against grout mold. Mix a paste of one of the two powders and lukewarm water (3:1 ratio). It is best to apply this to a toothbrush and use it to brush the tile joints thoroughly. The grainy consistency of the paste makes it rather unsuitable for silicone. So if you want to remove mold from silicone joints, you should use another method.

Remove mold from joints in the shower etc. with toothpaste

Toothpaste is also wonderfulTile grout cleaner, which can help you if you want to remove mild mold from joints. Apply some to an old toothbrush and use it to treat the moldy and discolored tile grout lines.

Cleaning tile joints – When do you have to completely replace silicone?

As you know, silicone is a soft material in which mold spores can spread easily. For this reason, you should always act immediately if you notice mold and remove the mold from joints (for example with the products mentioned above). Regular, preventive treatment is even better. If the infestation is already severe, the only solution is to replace the silicone. To do this, the old one is scraped out and replaced with a new one. It is best to use special, mold-suppressing silicone.

Do you have mold on untiled walls in the bathroom?Find out herehow to eliminate it.