Although plastic doors require less maintenance than those made from other materials such as wood, dirt can still accumulate on them. You should clean the doors regularly to ensure they remain in good condition. Before you start, you should first know how to clean plastic. With our cleaning tips you can clean white plastic doors - the yellowing is gone in a flash and effortlessly!
Cleaning white plastic doors with detergent – tips
- Start with a brush
It is possible that dust and dirt have accumulated on the plastic doors in your apartment. Therefore, before cleaning them, you should remove most of the dirt with a gentle brush. You can use the brush to clean the foundation of the door and even get into the cracks on the side of the door. Be careful not to press the brush too hard as you don't want to scratch the door.
- Use vacuum cleaner
Once you have removed most of the dirt from the door, you should use a vacuum cleaner. You have the option of moving a vacuum cleaner nozzle closer to the gap in the door as well as the hinges.
- Cleaning with household remedies – dishwashing liquid
After completing all the above steps, you can start the cleaning process by taking some water and dishwashing detergent.When cleaningTo clean the PVC doors in your house, you should proceed as follows - it is best to clean the heavily soiled area with a gentle sponge. After you have created a good foam, you should leave it on for about four to five minutes.
- Dry PVC doors
The final step is to remove the soap solution. To thoroughly clean the area, you can rinse it with cold water. Afterwards, take a dry cloth and wipe the door several times before closing it. This gives you a good opportunity to remove further contaminationto remove stains.
Clean white plastic doors with vinegar
This method is suitable for thoroughly cleaning doors, even if they have been closed for a long time and dirt has accumulated. Use your vacuum's brush attachment to remove dust and dirt from the outside of thedoor and the door frameand the hinges. Next, mix equal parts vinegar and warm water and pour the mixture into a spray bottle to create a natural solution. Spray the PVC door, being careful not to get anything on the glass, then wait ten minutes for the solution to absorb. Then clean them with a damp cotton cloth.
Turn yellowed PVC doors white again
Older, white PVC doors and lower quality PVC have been observed to yellow over time. If there is a problem with the quality of the product, not much can be done to restore the whiteness of the product.
If the doors have become discolored over the years due to dirt and debris, you can do the one already mentionedMagic trick with the vinegarattempt. Never give in to the temptation to use a scouring pad, wire wool, or anything else rough with excessive pressure, as this could permanently scratch and damage the surface of the plastic. Remember that many cleaning products contain hidden dyes and because PVC is a porous material, it can react with the dye and leave a permanent stain on your white doors. However, bleaching does not allow you to restore the white color.
Clean heavily soiled doors with baking soda
Baking soda is another approach that can be tried. Make a paste by mixing equal parts baking soda and water. Apply the paste to the yellow spots and then wait ten to fifteen minutes for it to take effect. Scrub the stains lightly with a cloth or sponge that is not too rough. The plastic doors should then be dried with a clean, dry cloth after wiping with clean water. Baking soda is a mild abrasive agent that can be used to remove stubborn stains from yellowed PVC doors without damaging the door frames themselves.
Cleaning white plastic doors – avoid these mistakes
Although the plastic is easy to clean, there are a few simple mistakes that can lead to damage. You should definitely avoid these common mistakes so that the plastic stays in good condition for years to come.
- Excessive force should be avoided when cleaning (you could scratch the material!).
- PVC should never be cleaned with a stiff-bristled brush.
- Do not use nail polish remover to clean PVC doors.
- Never use steel wool or scouring pads during the cleaning process.
- The use of chlorine bleach or other products containing chlorine bleach is unsuitable.
- A glass cleaner must not be used on the plastic doors.
- It is strongly recommended that you do not use cream cleaners, scouring powders or other abrasive cleaners.
- Do not use cleaning products that contain ammonia or corrosive substances.
